Use & Care

What's in the box

Your mat arrives rolled up in a box, along with everything you need to start putting.

Before you begin

1. Carefully remove the mat and accessories from the box.
2. Unroll the mat onto a clean, suitable surface.
3. Remove all packaging materials.
4. Check that the mat and accessories are in good condition. If anything looks wrong, contact us before you start.

Setting up your mat

Setup takes a couple of minutes. No tools, tape, or installation required.

1. Choose your surface. Pick a reasonably flat, even spot. The mat works on hardwood, tile, low-pile carpet, and suitable outdoor surfaces. For the most consistent roll, use a hard floor or low-pile carpet.
2. Unroll the mat. Position it in your practice area and let the rubber backing settle naturally against the floor.
3. Place the putting cups. Set each cup into its designated hole on the mat.
4. Position the walnut backstop. Place it at the end of the mat and secure it with the backstop locators.
5. Start putting. Grab your putter and a few golf balls, and you're ready to go.

Sizes & space

Each mat size handles a different maximum putt length.

Using your mat

PrimePutt is designed to help you build a consistent putting stroke and better distance control.

Where to stand

You can stand on the mat or beside it.

• Hard floor or low-pile carpet: standing directly on the mat is generally fine.
• Plush or heavily padded carpet: standing on the mat can create a slight dip around your feet that affects your putting line. Stand beside the mat instead.

Prefer to stand level with the putting surface? The PrimePutt Short Game Mat gives you a separate standing surface alongside your putting mat.

What to practice

Use the distance markers to putt from different lengths and work on:

Putting speed

PrimePutt mats have a Stimpmeter rating of approximately 9–11, depending on the surface underneath. Hard floors and low-pile carpet give the most consistent roll. Deep or heavily padded carpet may slow the ball slightly.

Routine cleaning

Your mat doesn't need regular brushing, ironing, or special treatments to keep its putting performance. When it needs a clean:

1. Vacuum to remove dust and loose debris. Occasional vacuuming is plenty.
2. Vacuum gently in the direction of the turf, including toward the cups.
3. Avoid aggressive brushing or scrubbing.

Spills & pet accidents

Liquid spills

Deal with spills as soon as possible so liquid doesn't soak into the mat or reach the floor underneath.

1. Blot the spill with a clean, dry towel to absorb as much liquid as you can. Don't scrub, as this can damage or fray the turf fibers.
2. Wipe the area gently with a clean cloth dampened with water. Don't soak the mat.
3. Blot dry with a dry towel to pick up any remaining moisture.
4. Let it dry completely. Lay the mat flat, turf side up, in a well-ventilated area away from direct sunlight and heat. Don't roll or store it until the turf and backing are fully dry.
5. Check underneath. For larger spills, check the floor beneath the mat, especially if it can absorb or be damaged by moisture.

Pet accidents

Urine and other organic messes can leave lingering odors, especially if moisture reaches the rubber backing or the floor. Follow the spill steps above, plus:

1. Remove the walnut backstop and set it somewhere dry. Don't leave it on the damp mat.
2. Use a pet enzyme cleaner. Lightly mist the area, or apply it with a clean cloth. Keep the area damp, not soaked, and let the cleaner work for 10–15 minutes (or as directed by the cleaner's manufacturer).
3. Blot and wipe. Blot with a clean towel, wipe gently with a cloth dampened with clean water, then blot again.
4. For accidents that soaked through or happened repeatedly: take the mat outside and rinse the whole mat with a garden hose on low pressure. Apply the enzyme cleaner to the affected area, let it work for 10–15 minutes, then rinse thoroughly. Dry it fully (see Drying).
5. Check the floor underneath. Urine can seep through the mat, so clean the floor beneath it as needed, especially hardwood.

Drying your mat

After cleaning or outdoor use, make sure your mat is completely dry before you store it.

• Lay the mat flat with the turf side facing up.
• Let it air-dry out of direct sunlight.
• Use a fan to help with airflow if needed.
• Check that both the turf and the rubber backing are fully dry before rolling it up.

Rolling & storage

Your mat is designed to roll up neatly when you're not using it.

1. Remove the putting cups.
2. Remove the walnut backstop.
3. Make sure the mat is completely dry.
4. Gently roll the mat with the turf side facing out.
5. Store it standing on one end in a clean, dry, indoor spot.

When you're ready to practice again, just unroll it. The heavy rubber backing helps it lie flat on its own.

Rolled-up dimensions

Useful for planning a storage spot. All measurements are in inches.

Roll diameter is the width across the rolled mat. Roll length is end to end. Thickness is approximate and includes the rubber backing.

Using your mat outdoors

PrimePutt mats are suitable for indoor and outdoor use. When you take yours outside:

• Place it on a reasonably flat, suitable surface.
• Don't leave it exposed to harsh weather or standing water for long periods.
• Bring the walnut backstop indoors after use. It isn't designed to stay out in the weather.
• Dry the mat if needed, then store it indoors when you're finished.

Safety

• Place the mat where its edges won't be a trip hazard, away from doorways and busy walkways.
• Before you putt, make sure the area around you and behind the backstop is clear of people, pets, and breakables.
• Supervise children when they use the mat, putters, or golf balls.
• Protect your floors: after a spill, pet accident, or outdoor use, check the floor under the mat for moisture, especially hardwood.

Frequently asked questions